Saturday 27 October 2012

Halloween - Witchy fun - Witch on a broomstick, flying over a city skyline.



Each year a friend of my brother has a Halloween party withall of the costumes, craziness and fun that comes with it.  Christmas is my favourite time of the year,but for Sarah – Halloween is HER Christmas!

After seeing my success with the Alice in Wonderland cake, Sarah asked whetherI would be able to make her a cake as a bit of a centrepiece.  Although I was not attending the party thisyear (having a holiday for a few days with a wonderful friend) I was happy tomake her one.  I think I was also stillcoming down off the high from the success of the Alice cake (or was it from all that sugar inthe gluten free mud cake??!).  Either wayI agreed with only one week to make it. Crazy!

I quickly got an idea in my mind that I wanted to create awitch and make it look like she was flying out of the cake, along with spooky scenery.  I’m not great with physics, but figured if Iused a dowel as her broomstick that I could push it into the cake as an anchorto achieve my desired outcome.  In theend, it would have been fine, however I decided to add a supporting piece underher bottom to allow for the cake to be transported a little easier.


A big thank-you to my fellow cakey girls (Kylieand Jen) who suggested I could hide it with fairy floss (candy floss) – as Iwas pondering cotton wool.  Much nicer tohave something edible and I was happier with the blue contrasting the orangeand black of the cake!




Making of the Witch
When making the witch I encountered some of my usual issues – I messed up her face on my first attempt!  The more I played with it, the scarier she got.  I know this is a Halloween cake, however I had more of a ‘sexy witch’ in mind than a freak! Once I took some time to quietly work I quickly had a new face made and was much happier!  Success!!


This time I also tried the suggestion of joining her with spaghetti (another cakey friend suggestion); however I will reconsider it for future figurines.  Spaghetti might make a figurine fully edible, however it also allows a lot more movement than toothpicks due to it’s smooth surface.  I found the witch quickly became a poltergeist! With her head swivelling so much, I had to handle her a little more and so she ended up with a little broader neck than I would have liked.  Another lesson learnt!

Making the decorations - pumpkins, stars, city
Other than that, the decorations were easy to make, although a little time consuming.  I used black icing to make hand-cut scenery and stars (covered in edible glitter) and orange/light orange icing to make pumpkins.  I also made a cat, however he didn’t suit the end result I desired, so he went home with Sarah to find a new home elsewhere.  Finally I made some pumpkin toppers for some cupcakes, so no shortage of sugar at this party!


For the cake, I realised that one week is not enough timefor me to think about the purchase of non gluten-free flour, so instead I useda packet butter mix cake.  In order tomake it a little more special I added some orange essence, filled the cake withorange butter cream and crumb-coated with a chocolate butter cream.  All was then topped off with a thin layer ofa very orange fondant.  My secretsurprise for Sarah was that I made the cake using the Zebra cake technique(LINK) – alternating with orange, purple and cream cake batter.  Apparently the cake was delicious, so I amdefinitely sighing with relief!!





 Anyway, I hope you enjoy this newest Kreation!  I expect the next one will be a little whileaway, so in the meantime I might start playing with some Christmas fun!

Ciao
Kerrie

Sunday 14 October 2012

Alice in Wonderland - A very merry 40th unbirthday to Ja and Jen

As mentioned in my previous post (on how to create this), here are the photos of the finished product.

With my finished cake :-)














Dressed as Alice at my sister and her husband's 40th Birthday.  AWESOME PARTY!!

Alice in Wonderland - the making of a work of art...

The past 6 weeks have been wonderfully inspiring for me. I was given the opportunity to create a cake for my sister and her husband's 40th Birthday party, based on the chosen theme "Alice in Wonderland".  Luckily Jen and Jason gave me free creative license and so this is what they got. :-)

This is me with my finished cake.  So happy!
I will post more photos of the finished cake separately.  This post is more about the characters I created and some of the challenges along the way.  I gained so much inspiration from others on the Intranet, so hope I can inspire others to just give it a go!

Alice in Wonderland
My first little creation was Alice herself.  I was inspired late at night (as is often the case) and started working on her face and arms.  I have to say that she resembled something out of Dexter for a little while, but luckily that didn't last long!
Over the next two days I worked on her when I had some spare time and discovered the benefits in Tylos in helping to harden the icing much more quickly.

I did have a mishap with Alice's face and learnt that normal make-up is a no-no.  Also that wiping things off with water will also take off the washable markers I used.  Oops.  On a positive, I actually wasn't happy with her original face, so it gave me an excuse to make one more 'Disney like'!
Alice with her original face (or at least the start of it)

Alice's new face after a water and make-up mishap
The White Rabbit & watch
The White Rabbit's watch  was quite simple, with the gold done with edible paint and the numbers with food writing pens.  Then I started on my favourite character of all - The White Rabbit!

I made the glasses out of cake decoration wire and edible gold paint.  His chain on his watch is a necklace I cut up (from my teen years), it's all about the detail!  He took a while as he involved many layers, but I really enjoy seeing where my imagination can take me!





The finished White Rabbit.  I cut up an old necklace for his chain and wired it into the icing. 
The Caterpillar and Hookah (water pipe)
I had fun making this little man, but much more fun inventing his hookah.  The hookah is held together by a toothpick and painted with gold edible paint.  The 'pipe' is actually more painted cake decorating wire.






Mad Hatter's hat
Just a little extra - guess the Mad Hatter has headed down the rabbit hole without it!


Queen of Hearts - Card Men
My sister requested I make the card man who was hunched over and I based both him and the ones standing up on cakes I had seen on the Internet (apologies to the original creator - I didn't tag your cakes at the time).  They were so perfect on the web that these ones I had to recreate.  I created the legs of the bendy one out of toothpicks that I covered in fondant after the rest of the card was set.  I also used two layers of icing for the card so that I could hide the toothpicks and ensure a smooth surface for writing.




Cheshire Cat
A lot larger than I expected, but I guess I got carried away with that magical smile.  Tail and paws to match, with the bottom tier of the cake as his body.  His whiskers are cake wire, but the rest is just icing.

I created the bottom tier of the cake as his body - We had to make the cake taller, so used both a topsy turvy Red Velvet cake and then another 12 inch mud cake.  Used sugar syrup to join (3 cups sugar to one cup water over low heat until melted).  I also used the syrup on each cake before the fondant was applied, however on this cake we decided to also do a chocolate butter icing as there was a little difference in cake size from shrinkage.  Smoothers were used to get a more uniformed effect. I think I would use the butter icing again for every tier as it gave a smoother result.





Making the base tier - the cat's body (note: I don't always look glam when making cakes.  I just had my hair done!)


Finished bottom tier - we had to add a layer to the base cake as the head was so big.  Oops!
The Queen of HeartsI actually made this one from the bottom up, starting with her skirt (moulded over a Japanese tea cup).  Body out of white icing and then layered with the red and black.  I was worried she looked a little like Princess Fiona from Shrek, but was thrilled when my sister saw her and thought she was bought! :-)

Her front of her skirt is hand painted using edible gold paint and edible marker pens. (not that anyone is going to eat it, but works well on icing!)



My sister says that this is her favourite character! :-)
Birthday Scroll, Teapot and Mushrooms
The birthday scroll is written in the Alice in Wonderland font and my sister requested that it say "A very merry 40th unbirthday to Ja and Jen" as it is not actually their birthdays.  Jason turned 40 in May and Jen only a week or so ago.  :-)

The teapot was something Jen and I created together and we loved the vibrant colours. A small flower is placed on each side to give it a little more character.  The mushrooms were created by Jen as separate pieces and then stuck together with royal icing.  She also piped the dots out of royal icing, smoothed with a wet paint brush.  The tree stump is one I created when I made my son's 1st Birthday cake (my first attempt at character modelling - this is my second!)



Tree & Rabbit hole
Originally I considered using a tree stump I made for my son's 1st birthday, however I felt that the proportions would be wrong on top of the cake.  So, after a family dinner (and a few drinks) I sat down and started covering cake decorating wire with the green wire cover and twisting it into a tree shape.  Then I started to individually pipe leaves on and a few hours later (the next morning)... a tree was born.  I think it worked out well as I designed the base to allow me to furrow a rabbit hole into the cake.




Chess Board
I discovered that I had so many characters that I actually needed to place some on the cake board.  Rather than just looking like they were an after thought, I thought I could place the Queen and White Rabbit on a home made chess board.  I have to say that I didn't really think when I made this and learnt a few lessons! LOL.  I started with the idea from a cute tutorial on Pinterest where the woman had melted candy into a tray.  I knew I wouldn't find the right colours, but thought perhaps if I used liquorice that I could just make a white coconut toffee for the opposing squares.  So, I cut out and placed all of the black liquorice and started on the toffee (1 cup sugar, 1/4 cup water).  Without a thermometer I guessed when it looked done based on it still being clear, but going hard on a cold metal spoon.  I thought I would just throw in the coconut and voila... fizzing... and a brown mess erupted.  Yep... the coconut had cooked!  Goes to show that even great plans sometimes go awry!  Second batch was a little undercooked, but gave a great frosted look.  I spooned it into all of the gaps and waited for it to dry.  As it looked a little messy I tried to pop it in the oven, but all that did was cook the liquorice.  Oops again!  On a positive note, the cooked liquorice and toffee held together much more stiffly and so I rolled out some fondant, flipped the chessboard over and cut the fondant as a new underside.  Worked perfectly as now it is dry I can pick it up and move it around.  I think persistence was the key with this one!



Other little extras
The cake needed many other details to finish it off, including all of the flowers and hearts.  I had also made a little teacup and pot for Alice, however discovered these delicious little plastic ones that Jen can keep instead.  Saved me using ones I disliked and also from making more!

Mixing colours
A BIG thanks to Jen for mixing all of the colours.  Warm hands and a great persistence meant that I had perfectly mixed colours every time.  I used Orchard white fondant and Americolor gel colouring.  We also used some of my Mum's old Wilton powder in the red as we struggled to get it red enough.  All of the faces and writing was done with either my Americolor gourmet food pens or my Crayola water-based marker pens.  It's great having something that washes off if you make a mistake, however be careful not to accidentally get anything wet!
 
Lessons learnt
1.  Consider the size of the cakes BEFORE you create the characters
I got so enthusiastic about making characters that one night it dawned on me that Alice was the size of the ENTIRE top tier of the cake.  Of course this meant that either we changed our expectations or arranged larger cakes.  Never one to back down from what we have in our heads, Jen and I decided we needed to upscale the cakes, even if that meant eating cake for a week - because that would be so tough! :-P

2.  Use Tylos to harden the icing!  
My biggest lesson was the use of Tylos in making my creations - it makes the drying process so much faster and helped with keeping some gorgeous curves in her skirt.  Thanks to the team at Merry Day in Cheltenham VIC for providing the tip on this one!

3. Use toothpicks
I also use toothpicks to help give the characters structuer, but I have to be careful not to pop them through their heads (as happened with Winnie the Pooh and Alice alike!)

4. Let your imagination run wild.
It's not as hard as it looks and you have nothing to lose, so give it a go!

Wishing you fun and inspiration!

Smiles,
Kerrie

Consuming the cake.  It was soooooo yummy!!